AutoStyles Home / AutoStyles Truck Accessories / AutoStyles SUV Accessories / AutoStyles Jeep Accessories / Carpet Kits / Convertible Tops / About AutoStyles
AutoStyles Presents
Warn 9.5si Diagnostic Self Recovery Winch

To Order By Phone, Call 1-888-407-9456. If you prefer to mail or fax your order, click here.

Prices Include Shipping & Handling Inside the Continental U.S.

Part Number: WAR.67600 $1,562.95
9.5si M.O.S.F.E.T. DIAGNOSTIC CONTROL
The 9.5si M.O.S.F.E.T. Diagnostic Control gives the user levels of control never before possible in a winch. As the M.O.S.F.E.T. Diagnostic Control performs the Power Out, Power In and Stop functions, it monitors key functions of the winch important to the field:
  • Temperature of the motor signals should the motor temperature exceed the ideal
        operating temperature.
  • Temperature of the M.O.S.F.E.T. Diagnostic Control unit to signal if the module is     over its ideal operating temperatures.
  • Over/Under voltage to assure that there is adequate battery power available.
    The feedback of this monitoring process is communicated via the LED on the hand-held remote control. With it's extreme sealing system and the 12.5lb aluminum die-cast body, the 9.5si is the winch for the really serious user who requires the ultimate in reliability, durability and control.
     
    		•
    9.5si SPECS/PART NUMBERS
    Part Number: PN 67600 (12V DC, CE)
    Rated Line Pull: 9500 lbs. (4310 kgs.) single-line
    Motor: Gen II, Series WoundTM
    Remote Control: 9.5si remote switch 12' (3.7) lead
    Controller Capabilities: M.O.S.F.E.T. technology with diagnostic capabilities
    Geartrain: 3-Stage Planetary
    Gear Ratio: 156:1
    Lubrication: Aeroshell #17
    Clutch (freespooling): Sliding Ring Gear
    Brake: Automatic Direct Drive Cone
    Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm)
    Weight: 89lbs. (36.3kgs.)
    Wire Rope: 125', 5/16" diameter (30m, 8mm diam.)
    Fairlead: Roller
    Recommended Battery: 650 CCA minimum for winching
    Battery Leads: 2 gauge, 72" (1.83m)
    Finish: Chromate with high-gloss powder coat
    Nuts/Bolts: PN 39570
    CE Winches: CE products are designed to meet European Standards. CE winches include CE labels and Manuals.
    12V DC PERFORMANCE SPECS
    Line Pull
    Lbs.(Kgs.)    		 Line Speed
    FT./min(M/min.)    		 Motor
    Current    		 Pull by layer
    layer/Lbs(Kgs.)
    0 62(18.9) 47 amps 1/9500(4313)
    2000(910) 16.3(4.97) 160 amps 2/8650(3927)
    4000(1810) 11.8(3.60) 230 amps 3/7920(3595)
    6000(2720) 9.31(2.84) 305 amps 4/7400(3359)
    8000(3630) 7.59(2.31) 370 amps 5/649(3150)
    9500(4310) 6.67(2.03) 425 amps  
    Above performance specs are based on first layer of drum
    Winch Dimensions: 23.1" L. x 6.3" D. x 10.0" H.
    (587mm L. x 160mm D. x 254mm H.)
    Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)

    Copyright © AutoStyles, Inc. 2004
    eXTReMe Tracker