ELECTRICAL	RIGGING ACCESSORIES	ACCESSORY KITS	PROTECTIVE COVERS
M.O.S.F.E.T. CONTROL	WINCH FAIRLEADS	WINCH WIRE ROPE

ELECTRICAL

To Order Call 1-888-407-9456  If You Prefer to Place Your Order by Mail or Fax, Click Here.

Prices Include Shipping & Handling Inside the Continental U.S.

	DUAL BATTERY ISOLATOR Because of the increased demands a winch and other accessories place on the DC power supply, many vehicles have multiple batteries-one to start the engine and another to power accessories. The WARN battery isolator prevents the problem of multi-battery drain. So no matter how drained your accessory battery becomes, it will never drain power from the battery you're depending on to start your engine. PN WAR.28022 $86.95 120 amp rated. PN WAR.22630 $74.95 95 amp rated. 86' and newer GM applications require connector kit. Will not fit '73-76 Jeep vehicles. PN WAR.36494 $57.95 GM Isolator Connector Kit. Required item when installing the PN WAR.22630 isolator on '86 and newer GM applications.
	POWER INTERRUPT KIT Allows you to connect aftermarket accessories to a battery lead and then disconnect power from a dash mounted switch. Recommended for extra protection. PN WAR.62132 $56.95
	QUICK CONNECT BOOSTER CABLES This kit provides convenient power connections that utilize the WARN heavy-duty Quick Connect system. Features 4 gauge copper cable construction. Includes: - 4'/1.2m battery connector cable with Quick Connect plug for easy access to   battery power without opening the hood - 16'/5m booster assembly with connector clamps allow stranded vehicles battery   to be reached from almost any position - Quick Connect plug dust cover keeps connector clean and ready to use - Installation hardware for easy installation to either top or side post batteries PN WAR.26769 $134.95 Complete kit as described above. PN WAR.26771 $92.95 16'/5m booster assembly with connector clamps only.
	WINCH REMOTE CONTROL Rubber hand grip. Comes standard with WARN self-recovery winches. PN WAR.64638 $73.95 Remote Control with 12'/3.7m lead, for 9.5ti winch. PN WAR.38626 $65.95 Remote Control with 12'/3.7m lead, for vehicle mounted winch, 3 or 5 prong with plastic plug. PN WAR.13447 $125.95 Remote Control with 39.3'/12m lead for vehicle mounted winch, 3 or 5 prong with plastic plug.
	QUICK CONNECT Quick Connect power accessories provide a safe and simple power source for portable winches and booster cables. Plugs allow convenient connection and disconnection to the battery power source. Power connections can be added to the front, rear or both ends of the vehicle. For winches over 2500lbs capacity. PN WAR.25933 $19.95 Quick Connect plug dust covers. PN WAR.22680 $46.95 Quick Connect plugs for 2.4 ga. cable, one pair. PN WAR.26405 $66.95 90"/71cm Quick Connect power cable, for front of vehicle. PN WAR.36080 $55.95 28"/71cm Quick Connect power cable, for attachment to control pack. PN WAR.32963 $142.95 20'/6m Quick Connect power cable, for rear of vehicle. Includes power interrupt kit. PN WAR.32966 $153.95 24'/8m Quick Connect power cable, for rear of vehicle. Includes power interrupt kit.

RIGGING ACCESSORIES

To Order Call 1-888-407-9456  If You Prefer to Place Your Order by Mail or Fax, Click Here.

Prices Include Shipping & Handling Inside the Continental U.S.

	WARN® SNATCH BLOCKS Used properly, the multi-purpose snatch block can double the pulling power of any winch, or change your pulling direction without damaging the wire rope. They also help to reduce heat build up and amp draw. PN WAR.8555 $63.95 16,000lbs/7258kgs maximum capacity snatch block. For winch capacities to XD8000 with 5/16" (8mm) wire rope. PN WAR.61560 $79.95 19,000lbs/8618kgs maximum capacity snatch block, with grease port and overload indicator. For winch capacities to 9.5ti with 5/16" (8mm) wire rope.
	WARN® HEAVY DUTY SNATCH BLOCKS Used properly, the multi-purpose snatch block can double the pulling power of any winch, or change your pulling direction without damaging the wire rope. They also help to reduce heat build up and amp draw. PN WAR.63490 $179.95 30,000lbs maximum capacity heavy-duty snatch block, with grease port. For winch capacities to M15000 with 7/16" (11mm) wire rope. PN WAR.15640 $168.95 24,000lbs/10886kgs maximum capacity heavy-duty snatch block, with grease port. For winch capacities to M12000 with 7/16" (11mm) wire rope.
	SHACKLES The clevis D-shackle provides a means for connecting the looped ends of cables, straps and snatch blocks. The shackel's pin is threaded to allow easy removal. PN WAR.13047 $27.95 For M6000 and larger winches. 3/4" (20mm) shackle with 7/8" pin diameter. PN WAR.28884 $18.95 For 4000lbs/1814kgs capacity winches and under. 5/8" (15.9mm) pin diameter.
	RECEIVER SHACKLE BRACKET Combines a heavy-duty receiver bracket with a 3/4", 20mm shackle. Utilizes a standard Class III receiver hitch as a recovery point for off-road use. Fits all standard Class III hitches (hitch pin not included). Hitch Pin Kit: 5/8" (15.9mm) diameter hitch pin and clip. PN WAR.29312 $53.95 PN WAR.63063 $12.95 Hitch Pin Kit. Fits 2" class III receiver.
	TOW HOOKS Secured properly to your vehicle's frame, tow hooks provide an attachment point for wire hooks, straps and chains, increasing your recovery options. Mounting hardware is included. Rated to 8000lbs/3629kgs capacity. Sold individually PN WAR.13230 $19.95  Black PN WAR.13200 $22.95 Chrome
	CHOKER CHAIN Can be used to hook up to another vehicle or sharp object for an anchor point. 10' of 5/16" (3m of 8mm) grade 7 chocker chain with hooks. PN WAR.26083 $75.95
	WARN® TREE TRUNK PROTECTOR Use this rigging strap along with a clevis/D-shackle to secure the winch wire rope to a wide variety of anchor points and objects. This strap is designed to help protect a live tree from the kind of damage a chocker chain or wire rope might cause. Constructed of tough, high quality nylon web encasing red warning marker to indicate damaged webbing. End loops are reinforced with abrasion resistant Cordura® wear pads. PN WAR.61415 $70.95 4" x 8' (10cm x 2.4m) tree trunk protector. Rated to 30,000lbs breaking strength. PN WAR.25322 $47.95 2" x 8' (5cm x 2.4m) tree trunk protector. Rated to 14,400lbs/6531kgs. PN WAR.28882 $39.95 1" x 8' (2.5cm x 2.4m) tree trunk protector. Rated to 6400lbs/2900kgs.
	RECOVERY STRAPS Use a recovery strap to "snatch" or pull out a stuck vehicle. Nylon webbing absorbs the shock of heavy pulls, while elastic rebound energy aids in quick recovery. Constructed of tough, high quality nylon web encasing a red warning marker to indicate damaged webbing. End loops are reinforced with abrasion-resistant Cordura® wear pads. Note: You should never use a recovery strap in a winching operation. For winching operations use a tree trunk protector strap or chocker chain. PN WAR.29899 $127.95 3" x 30' (8cm x 9m) premium recovery strap. Rated to 21,600lbs/9797kgs. Features a 18"/457mm Cordura® nylon sliding sleeve to help prevent excessive wear caused by exposure to sharp objects. PN WAR.29898 $88.95 2" x 30' (5cm x 9m) premium recovery strap. Rated to 14,400lbs/8165kgs. Features a 18"/457mm Cordura® nylon sliding sleeve to help prevent excessive wear caused by exposure to sharp objects. PN WAR.11392 $103.95 3" x 30' (8cm x 9m) standard recovery strap. Rated to 21600lbs/9797kgs. PN WAR.11391 $72.95 2" x 30' (5cm x 9m) standard recovery strap. Rated to 14400lbs/6531kgs.

ACCESSORY KITS

To Order Call 1-888-407-9456  If You Prefer to Place Your Order by Mail or Fax, Click Here.

Prices Include Shipping & Handling Inside the Continental U.S.

	HEAVY-DUTY WINCHING ACCESSORY KIT Designed for winch capacities to 16.5ti with 7/16"(11mm) wire rope. Kit includes: - Heavy-duty snatch block 24,000lbs/10886kgs maximum capacity. - Tree trunk protector 4" x 8' rated to 30,000lbs breaking strength. - 10' of 5/16" grade 7 choker chain with hooks. - Clevis/D-shackle 3/4" (20mm) pin diameter. - Standard recovery strap, 3" x 30' (8cm x 9m) rated to 21,600lbs/9797kgs. - Camouflage Cordura® nylon soft case. - WARN gloves. PN WAR.29460 $382.95 PN WAR.37881 $70.95 Bag only
	MEDIUM-DUTY WINCHING ACCESSORY KIT Designed for winch capacities to 9.5si with 5/16" (8mm) wire rope. Kit includes: - 10' of 5/16" (3m of 8mm) grade 7 chocker chain with hooks. - 1 Clevis/D-schakle 3/4" (20mm) pin diameter. - 19,000lbs/8618kgs maximum capacity snatch block with grease port. - 2" x 8' (5cm x 2.4m) tree trunk protector rated to 14,400lbs/6351kgs. - Red or camouflage Cordura® nylon soft case. - WARN gloves. PN WAR.25300 $207.95 Kit with red bag PN WAR.37880 $213.95 Kit with camouflage bag PN WAR.26081 $62.95 Bag only
	MEDIUM-DUTY WINCHING ACCESSORY KIT Designed for winch capacities to 9.5si with 5/16" (11mm) wire rope. Kit includes: - 4" x 8' (10cm x 2.4m) tree trunk protector rated to 30,000lbs breaking strength. - 2 Clevis/D-shackles 3/4" (20mm) pin diameter. - 19,000lbls/8618kgs capacity snatch block with grease port. - 3" x 30' (8cm x 9m) standard recovery strap rated to 21,600lbs/9797kgs. - Camo Cordura® nylon soft case. - WARN gloves. PN WAR.62858 $290.95

PROTECTIVE COVERS

To Order Call 1-888-407-9456  If You Prefer to Place Your Order by Mail or Fax, Click Here.

Prices Include Shipping & Handling Inside the Continental U.S.

WINCH HARD COVER Available for the XD9000i and X8000i winches, WARN hard winch covers are made from Armor GuardTM high impact co-laminate. They fit over a roller fairlead and provide maximum protection for your winch from weather and debris. Modern styling and an aerodynamic design. PN WAR.34035 $83.95 For XD9i and X8i winches, mounted on the Trans4mer system only. PN WAR.34700 $83.95 For XD9i and X8i winches mounted on the Jeep YJ.

SOFT WINCH COVER Made of durable nylon-backed vinyl, and held securely in place with elastic bungee cord fasteners. PN WAR.8557 $60.95 Fits the M8274-50 winch. PN WAR.18250 $71.95 Fits 9.5si, 9.5ti, XD9000i, and X8000i, mounted on the Classic Bumper. PN WAR.13916 $63.95 For the HS9500, XD9000, M8000 and M6000 winches, mounted on the Trans4mer and Combo Kit. PN WAR.15639 $84.95 Fits the M15000 and M12000 winches mounted on the Trans4mer, Classic Bumper and Flatbed Mount. PN WAR.13918 $63.95 Fits HS9500, XD9000, M8000 and M6000 winches mounted on the Classic Bumper (when winch control pack is mounted behind the motor). PN WAR.13917 $59.95 Fits 9.5si, 9.5ti, XD9000i and X8000i winches mounted on the Trans4mer, Combo Kit, Multi-Mount and Flatbed Mount and also fits HS9500, XD9000, M8000 and M6000 (with control pack mounted behind winch motor), mounted on the Trans4mer, Combo Kit, Multi-Mount and Flatbed Mount.

M.O.S.F.E.T. CONTROL

To Order Call 1-888-407-9456  If You Prefer to Place Your Order by Mail or Fax, Click Here.

Prices Include Shipping & Handling Inside the Continental U.S.

M.O.S.F.E.T. CONTROL PACK Every owner of WARN low-profile winches with Series WoundTM motors is a candidate for the most robust and reliable control pack possible. It replaces the electro-mechanical solenoid and uses no moving parts to control the Power In, Power Out and Step functions of the winch. The MOSFET module is sealed to resist any water and contaminate infiltration. A thick aluminum cover adds durability and heat resistance. Available in 12 and 24 volt versions with choices of two battery lead lengths, the M.O.S.F.E.T. CONTROL can be mounted on the winch or in another location, such as the engine compartment. PN WAR.65319 $479.95 For 12V system. Includes tie-rod mounting bracket, 72"(1.83m) battery power leads and 6" (15.2cm) leads from control box to winch. Allows for mounting of control box to winch. PN WAR.65320 $479.95 For 24V system. Includes tie-rod mounting bracket, 6' battery power leads and 6" (15.2cm) leads from control box to winch. Allows for mounting of control box to winch. PN WAR.65429 $479.95 For 12V system. Includes mounting bracket, 72"(1.83m) battery power leads and 72"(1.83m) leads from control box to winch. Allows for mounting of control box to remote location. PN WAR.65430 $479.95 For 24V system. Includes mounting bracket, 72"(1.83m) battery power leads and 72"(1.83m) leads from control box to winch. Allows for mounting of control box to remote location.

WINCH FAIRLEADS

To Order Call 1-888-407-9456  If You Prefer to Place Your Order by Mail or Fax, Click Here.

Prices Include Shipping & Handling Inside the Continental U.S.

	ROLLER FAIRLEAD Reduces wire rope wear, especially on pulls at severe angles. Zinc plated finish. PN WAR.5742 $114.95 For winches over 4000lbs/1814kgs capacity (except M15000 & M6000 SDP) PN WAR.61956 $175.95 For M15000 winch
	HAWSE FAIRLEAD The simple, basic hawse fairlead is designed to guide the wire rope to and from the winch drum. Black finish. PN WAR.7608 $38.95 For winches over 4000lbs/1814kgs
	FAIRLEAD COVER Roller fairlead covers are made of high-strength ABS co-laminate and attach easily to a roller fairlead. PN WAR.60390 $45.95 Fits the Trans4mer, Classic Bumper, Combo Kit, Jeep and Defender mounting kits. PN WAR.25584 $44.95 Fits Enforcer Bumper PN WAR.35363 $44.95 Fits Semi-Hidden Kit F150 & Silverado only-not Sierra PN WAR.25580 $44.95 Fits Semi-Hidden Kit, Sierra & Super Duty

WINCH WIRE ROPE

To Order Call 1-888-407-9456  If You Prefer to Place Your Order by Mail or Fax, Click Here.

Prices Include Shipping & Handling Inside the Continental U.S.

	WARN® SYNTHETIC WINCH ROPE WARN engineers faced a challenge when they set out to develop a synthetic rope for winching. The rope had to be light weight, durable and easy to handle-but it also needed to maintain high tensile strength over a wide range of temperatures. What they came up with is a unique design that provides the optimal balance of performance characteristics needed by rock crawlers and owners of advanced trail rigs. The 100' WARN Synthetic Rope combines the best attributes of two types of high-performance fibers, woven into one rope. The first 30 feet of rope wound nearest the drum is made of a liquid crystal polymer fiber that provides excellent strength and bending properties over a wide range of temperatures. The remaining 70 feet of rope, from the hook back, is woven from another unique polyethylene fiber that exhibits superior handling and abrasion resistance. A rugged hook-with 360-degree swivel and thimble-comes standard, along with a Hawse fairlead and "Ballistic Nylon" sliding sleeve that provides extra protection against abrasion and wear. Designed for use on winches with rated capabilities of 9500 lbs. or less. PN WAR.66437 $691.95
	REPLACEMENT WIRE ROPE Damaged wire rope must be replaced to safely operate any winch. Constructed of aircraft wire rope and galvanized to help resist corrosion. Includes swaged loop on one end, and wire rope terminal on the other. PN WAR.61950 $156.95 90', 7/16" (27m, 11mm) Winch model M15000, PN 47801 PN WAR.61950 $156.95 90', 7/16" (27m, 11mm) Winch model M15000, PN 478022 PN WAR.15712 $165.95 125', 3/8" (38m, 9.5mm) Winch model M12000, PN 17801 PN WAR.38423 $178.95 125', 3/8" (38m, 9.5mm) Winch model M12000, PN 178012 (A) PN WAR.38423 $178.95 125' 3/8" (38m, 9.5mm) Winch model M12000, PN 265072 (A) PN WAR.25987 $157.95 125', 5/16 (38m,8mm) Winch model 9.5si, PN 67600 PN WAR.25987 $157.95 125', 5/16" (38m, 8mm) Winch model 9.5ti, PN 67550 PN WAR.27110 $130.95 100', 5/16" (30m, 8mm) Winch model HS9500, PN 48500 PN WAR.38314 $129.95 100', 5/16" (30m, 8mm) Winch model HS9500, PN 485002 (A) PN WAR.27110 $130.95 100', 5/16" (30m, 8mm) Winch model XD9000, PN 28500 PN WAR.38314 $129.95 100', 5/16" (30m, 8mm) Winch model XD9000, PN 285002 (A) PN WAR.38314 $129.95 100', 5/16" (30m, 8mm) Winch model XD9000, PN 265012 (A) PN WAR.25987 $157.95 125', 5/16" (38m, 8mm) Winch model XD9000i, PN 27550 PN WAR.38312 $155.95 125', 5/16 (38m, 8mm) Winch model XD9000i, PN 275502 (A) PN WAR.38312 $155.95 125', 5/16" (38m, 8mm) Winch model XD9000i, PN 274022 (A) PN WAR.26749 $169.95 150', 5/16" (46m, 8mm) Winch model M8274-50, PN 38631 PN WAR.38311 $167.95 150', 5/16" (46m, 8mm) Winch model M8274-50, PN 386312 (A) Pn WAR.38311 $167.95 150, 5/16" (46m, 8mm) Winch model M8274-50, PN 375832 (A) PN WAR.15276 $108.95 80', 5/16" (24m, 8mm) Winch model M8000, PN 20910 PN WAR.27110 $130.95 100', 5/16" (30m, 8mm) Winch model M8000, PN 26502 PN WAR.38314 $129.95 100', 5/16" (30m, 8mm) Winch model M8000, PN 265022 (A) PN WAR.38314 $129.95 100', 5/16" (30m, 8mm) Winch model M8000, PN 265032 (A) PN WAR.27110 $130.95 100', 5/16" (30m, 8mm) Winch model X8000i, PN 28401 PN WAR.38314 $129.95 100', 5/16" (30m, 8mm) Winch model X8000i, PN 284012 (A) PN WAR.15276 $108.95 80', 5/16" (24m, 8mm) Winch model M6000, PN 45880 PN WAR.38310 $108.95 80', 5/16" (24m, 8mm) Winch model M6000, PN 458802 (A) PN WAR.38310 $108.95 80', 5/16" (24m, 8mm) Winch model M6000, PN 465052 (A) PN WAR.38309 $85.95 50', 5/16" (15m, 8mm). Winch Model M6000, PN 37960 (A) PN WAR.61346 $95.95 50', 5/16" (15m, 8mm) Winch model M6000 SDP, PN 39116 Footnote (A): Includes loop thimble
	WIRE ROPE EXTENSION Galvanized aircraft wire rope with loop on both ends allows you to extend the reach of your winch. Includes swaged loop on both ends. PN WAR.25430 $81.95 (5/16" x 50') PN WAR.25431 $121.95 (3/8" x 75')

Copyright © 2004 [AutoStyles]. All rights reserved.
Information in this document is subject to change without notice.
Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.